Hi guys!
I've opened up my m18x R1 to add 2 7970m cards in it.
Unfortunately, I looks like something went wrong :
- When I start the computer, there is nothing on the screen (no POST) and I get 8 beeps.
- I did what Dell recommends doing = reset CMOS by inplugging the CMOS battery for 30 seconds => no change
- I did the FN power boot => gives me 5 beeps
So my question is : can this be related to the change of GPU? at no point do I get 4 beeps which according to the Dell beep table is...
No POST (5 and 8 beeps) after GPU change (2x 7970m)
I've opened up my m18x R1 to add 2 7970m cards in it.
Unfortunately, I looks like something went wrong :
- When I start the computer, there is nothing on the screen (no POST) and I get 8 beeps.
- I did what Dell recommends doing = reset CMOS by inplugging the CMOS battery for 30 seconds => no change
- I did the FN power boot => gives me 5 beeps
So my question is : can this be related to the change of GPU? at no point do I get 4 beeps which according to the Dell beep table is...
No POST (5 and 8 beeps) after GPU change (2x 7970m)